User's Manual

12
Selecting Input Source
Picture Settings
• Press the SOURCE button on the
main unit or on the remote control to
display the Input Source list.
• Press
buttons to select your
desired input source among: TV/AV/
Component/HDMI1/HDMI2/HDMI3/
VGA/USB and then press OK button
toconrm.
• Press the MENU button on the main
unit or on the remote control and
then press
buttons to select
PICTURE menu.
• Press buttons to select the
following picture options and then
press buttons to adjust each
option’s setting.
CUSTOMIZING TV SETTINGS
Picture Mode
Cycle among picture modes: Dynamic/Movie/User/
Standard.
Alternative: you may press the P.MODE button to
select the picture mode directly.
Contrast
Adjust the difference between light and dark levels in
the pictures. (For User mode)
Brightness
Increase or decrease the amount of white in the picture.
(For User mode)
Color Control the color intensity. (For User mode)
Tint Adjust the balance between red and green levels.
Sharpness
Adjust the level of crispness in the edges between light
and dark areas of the picture. (For User mode)
Color Temperature Cycle among color temperatures: Cool/Normal/Warm.
Blue Screen
Allow the blue background to turn On/Off during weak or
no signal conditions.