0 PLACE SETTINGS SS DISHWASHER SC-1000AU7DS INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Getting Started 11 Water Connection 12 How to Connect Safety Supply Hose 13 Drain Hose Connection 13 Water Outlet and Drain Connection 13 Positioning the Appliance 14 Electrical Connection 15 Starting a Wash Program 16 Instructions Loading the Dishwasher Guide 17 Loading the Upper Basket 18 Adjusting the Upper Basket 19 Loading the Lower Basket 16 Cu
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Dishwasher. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) To reduce risk of fire, electric shock or injury, always follow these basic precautions and accident prevention measures when using this appliance, including the below: NOTE: This appliance should be installed by an authorised technician else warranty will be void. INSTALLATION • The product is heavy, be careful when moving it. To avoid back or other injury, have 2 people lift or mechanical aid when installing.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments; – By clients in hotels, motels and other residential type environments; – Bed and breakfast type environments. CLEANING AND MAINTENANCE • Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so.
PRODUCT OVERVIEW CONTROL PANEL 1. Power Press this button to turn on your dishwasher, the screen lights up. 2. Delay Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hour. 3. Child Lock This option allows you to lock the buttons on the control panel - except the Power button - so children cannot accidently start the dishwasher.
PRODUCT OVERVIEW (Cont.) Extra Drying If you want to dry your dishes completely, please select this function.( It can only be used with Intensive, Heavy, ECO, Glass, 90Min) 5. Program Select the appropriate washing program, the selected program indicator will be lit. 6. Start/Pause To start the selected washing program or pause the washing program when the machine is working. 7. Display To show the reminding time, delay time, error code etc. 8.
PRODUCT OVERVIEW (Cont.
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation.
GETTING STARTED (Cont.) WATER CONNECTION Connect the water supply hose to a threaded 3/4”connector. During operation, the dishwasher will heat up the appliance to the required temperature so please be sure that the hose it not kinked or squashed and tightly fastened in place. If the hose is new or has not been used be sure to let the water run for a little bit to clear the hose of any impurities. WATER PRESSURE Minimum inlet water pressure is 0.04MPa Maximum inlet water pressure is 1.
GETTING STARTED (Cont.) DRAIN HOSE CONNECTION The drain pipe hose can go into a drain pipe with a diameter of 40mm (Option B), or let it run into the sink. Make sure to avoid bending or crimping the hose (Option A). The top of the hose is not to exceed 1000mm. HOW TO DRAIN EXCESS WATER FROM HOSES If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly into the sink.
GETTING STARTED (Cont.) POSITIONING THE APPLIANCE • This dishwasher is freestanding. Position it close to an existing water inlet and drain connection and be sure that there is a power supply nearby. • The back of the appliance should lean against the wall behind. The sides along any adjacent walls. The appliance can be recessed under a single benchtop. • Make sure water hoses or power cables arent underneath the appliance. 1. 2. 3.
GETTING STARTED (Cont.) ELECTRICAL CONNECTION To connect the dishwasher, insert the plug into a correctly earthed power socket. If the socket is not appropriate for the plug, replace rather than use an adaptor (with a qualified electrician), the likes of such devices such as adaptors can cause overheating and burns. WARNING: • Do not use an extension cord or adaptor. • Do not bend the power cord and do not place appliance on top of cord. • Do not modify the plug provided.
STARTING A WASH PROGRAM LOADING THE DISHWASHER For best performance, follow bellow guidelines: NOTE: Open the door slightly (50mm) to assist in drying after every wash. * This program was used for testing the appliance to the Australian Standard AS/NZS 2007.1 with 10 place settings, Rinse aid settings on 6 and the upper basket with the upper set of wheels on the rail support.
INSTRUCTIONS LOADING THE DISHWASHER For best performance, follow bellow guidelines: ATTENTION: BEFORE LOADING BASKETS Its not necessary to rinse all dishes before putting into dishwasher, though we suggest you scrape off any large amounts of leftover food and soften remnants of burnt food in pots and pans to ensure cleaning efficiency. Place objects in the dishwasher in the following way: • Hollow items such as cups, glasses and pots should be upside down when placed into the dishwasher.
INSTRUCTIONS (Cont.) LOADING THE UPPER BASKET The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans.
INSTRUCTIONS (Cont.) ADJUSTING THE UPPER BASKET The height of the upper basket can be adjusted in order to create more space for large utensils both for the upper/lower basket. The height of the upper basket can be adjusted by placing the wheels on different height on the rails. Long items, serving cutlery, salad servers and knives should be placed on the shelf so that they do not obstruct the roatation of the spray arms.
INSTRUCTIONS (Cont.) LOADING THE LOWER BASKET Larger items such as pots, pans, lids, serving dishes and bowls should be placed into the lower basket of the dishwasher.
INSTRUCTIONS (Cont.) CUTLERY BASKET All cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the spoons should be loaded seperately into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket as shown in the picture. WARNING • Do not let any items extend through the bottom. • Always load sharp utensils with the sharp point down.
INSTRUCTIONS (Cont.) DISHWASHER DETERGENT WARNING: • Only use detergent that are meant to be used for dishwashers • Only add the detergent just before starting the dishwasher so it doesnt become damp, if becomes damp this will stop it from dissolving properly. • Be sure to always supervise and that no children can reach detergent when door is open. Best when adding detergent, make sure its just before you start dishwasher and you close the door straight away.
INSTRUCTIONS (Cont.) ADDING DETERGENT A: For main wash detergent B: For Pre-Wash detergent Fill the detergent dispenser with detergent. The marking indicates the dosing levels as illustrated on the right Please observe the manufacturers dosing and storage recommendations as stated on the detergent packaging. Be sure to close the lid and press until it locks in place. If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent chamber.
INSTRUCTIONS (Cont.) RINSE AID DISPENSER The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indator turns completely black.
INSTRUCTIONS (Cont.) WHEN TO REFILL RINSE AID DISPENSER Fill the rinse aid dispenser when the light on the control panel comes on. When the rinse indicator is full, the whole indicator will be dark. As the rinse aid is used, the size of the dark dot decreases as indicated below. ADJUSTING THE RINSE AID DISPENSER The rinse aid has 6 settings, always start with the dispenser set on “4”.
INSTRUCTIONS (Cont.) STARTING THE DISHWASHER • Open the dishwasher and draw out the lower and upper basket and load in the dishes. Push them back in. • When you finished loading the dishes, open up the detergent dispenser and add in your detergent. Refer to pages 23 & 24 for more information of adding detergent and Rinse aid dispensers. • Once you have added your detergent and loaded the dishwasher. Close the door and be sure that it clicks in so that its closed correctly.
FAQs Problem Possible Cause The fuse is blown or circuit breaker is activated Replace the fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher. The power supply is not turned on. Make sure the dishwasher is powered on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket. Water Pressure is low Check that the water supply is connected properly and the water is turned on.
USEFUL INFORMATION WARNING • If the dishwasher overflows, make sure to turn off the main water supply before making a service call. • If there is water in the base, be sure to remove it before restarting the dishwasher. CLEANING AND MAINTENANCE The filter prevents remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter, a flat (main filter) and a micro filter. 1.
USEFUL INFORMATION (Cont.) REMOVING THE FILTER SYSTEM To remove the filter assmebly to clean please follow the below instructions: STEP 1 Turn the filter anti-clockwise direction. STEP 2 Lift the filter up NOTES By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water. CAUTION • When cleaning the filters take care not to damage or distort the shape of it. • Never use the dishwasher without the filters.
ERROR CODES 30
SPECIFICATIONS Height 845mm Width 448mm Depth 600mm Depth (door open) 1175mm Standard Cleaning Cycle ECO Noise Level 49 dB(A) Water Pressure 0.04-1.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd 32
