0KG FRONT LOAD WASHING MACHINE INSTRUCTION MANUAL MODEL: SC-1000AU9FLIN Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Operations 10 Getting Started 14 Instructions 18 Cleaning and Maintenance 20 FAQs 22 Specifications 23
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) ELECTRICAL SAFETY • Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order. • Power connection: Do not use an adaptor or an extension cord. Plug the power plug directly into a separate power point that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed. • Power cord: Do not kink or damage the power supply cord.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard. • Only the filter requires regular cleaning, everything else is non user-serviceable parts. Do not try to repair, disassemble or modify the appliance.
PRODUCT OVERVIEW 8
PRODUCT OVERVIEW (Cont.) CONTROL PANEL 1. ON/OFF: ON/OFF button allows you to turn the appliance off or on. 2. START/PAUSE: Press this button to start or pause the washing cycle. 3. OPTION: This will allow you to select an additional function and will light when selected. CHILD SAFETY LOCK: Press and hold “Extra Rinse” & “Pre Wash” for 3 seconds to activate child safety lock. Press and hold both buttons again to de-activate. 4.
OPERATION PRE-WASH The Prewash function can get an extra wash before the main wash, it is suitable for washing the dust rises to surface off the clothes. You need to put detergent into the case when you select “Prewash”. EXTRA RINSE The laundry will undergo an extra rinse once you select it. SPEED WASH This function can decrease the washing time. MY CYCLE Save your most frequently used washing cycle as a favourite. To do this: 1.
OPERATION (Cont.) TEMP Press this button to regulate the temperature (Cold, 20°, 30°, 40°, 60°, 90°) Spin. SPIN Press the button to change the spin speed.
OPERATION (Cont.
OPERATION (Cont.) WASHING PROGRAM TABLE * *“Cotton ECO” is the washing program to which the information in the efficiency label relates, and is suitable to clean normally soiled cotton laundry and that it is the most efficient programme in terms of combined energy and water consumptions for washing that type of cotton laundry, The actual water temperature may differ from the declared cycle temperature.
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.
GETTING STARTED (Cont.) LEVELLING THE APPLIANCE IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate levelling of the appliance. This is a must if your floor in unbalanced to level the washing machine. • Make sure to position the appliance on a level and stable ground. If the floor is uneven you can adjust the feet by twisting the feet.
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. • Connect the inlet pipe as indicated, there are two ways of connecting the inlet pipe. • Minimum Inlet Water Pressure: 0.05MPa Maximum Inlet Water Pressure: 1MPa 1. Connection between the Tap and inlet hose. 2. Connection between the screw tap and inlet hose.
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE • Do not kink or protract the drain hose. Position the drain hose correctly other wise damage will result in water leakage. • The height of the water drain hose can be from 60 to 100cm. • Do not bend the drain hose or place it under the washing machine. • Be sure to only use new hose sets when connecting the Washing Machine. Do not re-use old hoses. There are two ways to place the end of the drain hose: 1. Put it into the water trough. 2.
INSTRUCTIONS BEFORE FIRST USE • Make sure the washing machine is completely level as to previous instructions on how to level your washing machine. • Make sure the water inlet hose is installed correctly. • Make sure that the washing machine is plugged into the power socket. • When the water inlet hose is installed, turn on the water supply on the tap. After the above steps have been completed, In a few simple steps you can select the type of wash you want and get started.
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAIN PUMP FILTER • • • • • Be careful of the hot water! Allow detergent solution to cool down. Unplug the machine to avoid electrical shock before washing. Drain pump filter can filter the yarns and small foreign matters from the washing. Clean the filter periodically to ensure the normal operation of washing machine.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DETERGENT DISPENSER 1. Press down the arrow location on the softener cover inside the dispenser drawer. 2. Lift the clip up and take out softener cover and wash all grooves with water. 3. Restore the softener cover and push the drawer into position.
FAQs Please be sure to contact our call centre on 1300 296 699 if you cannot identify the issue with the below information.
SPECIFICATIONS Power Supply 220-240V ~ 50Hz Standard Water Pressure 0.05MPa~1MPa Max Current 10A Washing Capacity 10KG Rated Power 1950W Energy Consumption 3.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd 26
