32” HD LED LCD TV SC-32AU300 INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Installation 8 Controls and Connections 10 Remote Control 12 Getting Started 15 Basic Operations 16 Electronic Program Guide (EPG) 17 Recording 18 Media 19 Menus 20 Picture Settings 20 Sound Settings 21 Channel Settings 22 Lock Settings 23 Time Settings 24 Setup Settings 25 FAQs 26 Specifica
GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
GENERAL SAFETY INSTRUCTIONS (Cont.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not temper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. • Please do not expose the product to splashing or water contact • Please do not place any object on top of the product including objects filled with liquids such as vases.
GENERAL SAFETY INSTRUCTIONS (Cont.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
GENERAL SAFETY INSTRUCTIONS (Cont.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. • Do not install this equipment in a confined space such as a bookcase or similar unit. • Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
INSTALLATION Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. Attaching the stand Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right.
INSTALLATION (Cont.) Wall-Mounting Instructions Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. • We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own. BACK OF TV NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
CONTROLS AND CONNECTIONS 10
CONTROLS AND CONNECTIONS (Cont.) 1. HEADPHONE JACK 2. Y/Pb/Pr INPUT (COMPONENT) 3. PC AUDIO INPUT 4. VGA INPUT 5. COAXIAL 6. RF (ANTENNA INPUT) 7. HDMI 1 (ARC) 8. HDMI 2 9. HDMI 3 10. USB INPUT 11. VIDEO INPUT (COMPOSITE) 12.
REMOTE CONTROL 12
REMOTE CONTROL (Cont.
REMOTE CONTROL (Cont.) Using the Remote Control • Battery should normally last for about one year. • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident. • Keep batteries away from children and pets. • Never throw batteries into a fire. • Do not drop, or impact the remote control as it void warranty immediately.
GETTING STARTED IMPORTANT Make sure all equipment is correctly connected (as illustrated on the previous pages) before connecting the unit to a wall socket and turning onthe power. To turn the power On Or Off: • Plug the power cord into a suitable power point, • Turn on the power switch. • Press the STANDBY/ON button • When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below.
BASIC OPERATIONS SELECTING AN INPUT SOURCE • Press the SOURCE button on the remote control, to display the input source list. • Press the buttons to select the input source, and then press OK to confirm. • You can access connected USB drives by selecting MEDIA. NOTE: The first time you use this TV, make sure to go through the first time installation and auto-search for all the DTV channels.
ELECTRONIC PROGRAM GUIDE (EPG) EPG GUIDE (DTV MODE ONLY) • Press the EPG button on the remote control to display the above interface. • Before viewing EPG information, you have to ‘activate’ each channel for which you want to view program information. To do this, press the buttons to select a channel in the left column, then press OK to confirm.
RECORDING NOTE: Before you can record with this TV, make sure you have the USB you wish to use formatted as a FAT32 USB storage device. Then insert the device into your TV. 1. Insert your USB device into the USB Port 2. When watching Digital TV, Press the RECORD button on the remote control to start recording. Press record again to remove information bar. 3. Press RECORD again or the STOP button to display information about recording. 4. Select “Power Off” to stop recording and turn off the TV.
MEDIA MEDIA PLAYBACK • First insert a USB Device into the TV • Press “MEDIA” on the remote control. • Use the directional arrow keys to go through folders within your USB device to access Photo’s or Movies.
MENUS PICTURE SETTINGS To access Picture settings, press the MENU button and go to picture.
MENUS (Cont.) SOUND SETTINGS To access Sound settings, press the MENU button and go to Sound.
MENUS (Cont.) CHANNEL To access CHANNEL settings, press the MENU button and go to CHANNEL.
MENUS (Cont.) LOCK MENU To access LOCK settings, press the MENU button and go to Lock. Default factory password is “3758”, then you can set your own password to lock the TV. Note: if you ever forget the password, use the master password “6158”.
MENUS (Cont.) TIME SETTINGS To access TIME settings, press the MENU button and go to TIME.
MENUS (Cont.) SETUP SETTINGS To access Setup settings, press the MENU button and go to SETUP.
FAQs GENERAL PROBLEMS WITH TV SET PROBLEM SOLUTION No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Make sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. • Autotune the unit again • Go to another channel No sound or distorted sound • • • • • • Make sure everything is connected correctly Check if input settings for TV is correct Audio settings are properly set Make sure volume is not muted.
SPECIFICATIONS Display Device 32” HD LED LCD TV Resolution 1366 × 768 Display Colours 16.7M Contrast ratio: 1200 : 1 Aspect Ratio 16 : 9 Multimedia Playback Format under USB Mode Movie: AVI, MPEG, MPEG-4, TS, MKV, FLV, VC-1/WMV9, RMVB Music: MP3, AAC, WAV Photo: JPEG, JPG Power Source 100-240V/50-60Hz Power Consumption ≤48 USB 5V max. 500mA With stand: 730 × 133 × 466 mm ( w x d x h) Dimensions Without stand: 730 x 75 x 430 mm ( w x d x h) Net: 3.9 kg Weight Gross: 5.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd VERSION: 1.
