49” UHD LED LCD TV SC-49AU300 INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Installation 8 Controls and Connections 10 Remote Control 12 Basic Operations 15 Media 16 Getting Started 17 Menus 18 Channel Settings 18 Picture Settings 18 Sound Settings 19 Time Settings 19 Lock Settings 20 Setup Settings 20 HDMI CEC 21 Electronic Program Guide (EPG) 22 Recording 23 FAQs 24 Specifications 25 Customer Help
GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
GENERAL SAFETY INSTRUCTIONS (Cont.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not temper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. • Please do not expose the product to splashing or water contact • Please do not place any object on top of the product including objects filled with liquids such as vases.
GENERAL SAFETY INSTRUCTIONS (Cont.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
GENERAL SAFETY INSTRUCTIONS (Cont.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. • Do not install this equipment in a confined space such as a bookcase or similar unit. • Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
INSTALLATION Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. Attaching the stand Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right.
INSTALLATION (Cont.) Wall-Mounting Instructions Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. • We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own. BACK OF TV VESA PATTERN: 200 x 200mm NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
CONTROLS AND CONNECTIONS 10
CONTROLS AND CONNECTIONS (Cont.) 1. OPTICAL 2. AUDIO L/R INPUT 3. VIDEO INPUT (COMPOSITE) 4. Y/Pb/Pr INPUT (COMPONENT) 5. HDMI 1 (ARC) 6. HDMI 2 7. HDMI 3 8. HDMI 4 9. RF (ANTENNA INPUT) 10.
REMOTE CONTROL 12
REMOTE CONTROL (Cont.
REMOTE CONTROL (Cont.) Using the Remote Control • Battery should normally last for about one year. • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident. • Keep batteries away from children and pets. • Never throw batteries into a fire. • Do not drop, or impact the remote control as it void warranty immediately.
BASIC OPERATIONS BASIC OPERATIONS • Press the SOURCE button to display the input source list. • Press the buttons to select the input source, and then perss OK to confirm. • You can access connected USB drives by selecting MEDIA. • Press the P-MODE to select the picture mode: Standard, Mild, Personal, Dynamic.
MEDIA MEDIA PLAYBACK • First insert a USB Device into the TV • Press “MEDIA” on the remote control. • Use the directional arrow keys to go through folders within your USB device to access Photo’s or Movies.
GETTING STARTED TURN THE POWER ON OR OFF: • Plug the power cord into a suitable power point, • Turn on the power switch. • Press the STANDBY/ON button • When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below. • Press the use the buttons to select options for languages, country, time zone, tune type then button to change between them. • Press the OK button to begin Auto tuning to scan for stations.
MENUS 18
MENUS (Cont.) Sound Mode: Standard, Music, Movie, Sports, Personal. Treble / Bass: When in Personal Mode Adjust higher-pitched sounds (Treble) and lower-pitched sounds (Bass) from 0 to 100. Balance: Select the audio output between the left and right speaker from -50 to 50. Auto Volume Level: Turn On/Off Auto Volume Level. AD (Audio Description): Press the OK button then press the AD switch to ON or OFF. S/PDIF Mode: Select S/PDIF audio output type. Available options: Off, Auto, PCM.
MENUS (Cont.) LOCK MENU (DTV MODE) Parental Lock: No Block, Block All, Block G and above, Block PG and above, Block M and above, Block MA and above, Block AV and above, Block R and above. Key Lock: On/Off System Lock • Factory default password “3758” • The master password “6158”. • Press the button for On/Off Channel Lock • Press the OK button • Press the to select channel • Press the GREEN button repeatedly to lock/unlock Selected channel.
MENUS (Cont.) HDMI CEC CEC Control: Turn on/off HDMI CEC (Consumer Electronic Control) TV Auto Power On: Enables or disables turning on the TV when the HDMI connected device is turned on. ARC: On/Off Audio Return Channel. HDMI UHD: Enhanced’ for 4K-UHD content or Standard for HD content. Blue Screen: ON or OFF. System Information: TV model number, software version Reset to Defaults: Press the OK button and press to reset settings to factory defaults.
ELECTRONIC PROGRAM GUIDE (EPG) • Press the EPG button to display the EPG interface (above). • Use the • Press the buttons to select a channel in the left column, then press the OK button. buttons to switch between the channels list on the left column and the programs list on the right side of the screen • Press the buttons to select different channel/program.
RECORDING NOTE: Before you can record with this TV, make sure you have the USB you wish to use formatted as a FAT32 USB storage device. Then insert the device into your TV.` 1. Insert your USB device into the USB Port 2. When watching Digital TV, Press the RECORD button on the remote control to start recording. Press record again to remove information bar. 3. Press RECORD again or the STOP button to display information about recording. 4. Select “Power Off” to stop recording and turn off the TV.
FAQs GENERAL PROBLEMS WITH TV SET PROBLEM SOLUTION No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Make sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. • Autotune the unit again • Go to another channel No sound or distorted sound • • • • • • Make sure everything is connected correctly Check if input settings for TV is correct Audio settings are properly set Make sure volume is not muted.
SPECIFICATIONS Display Device 49” Ultra HD LED LCD TV Resolution 3840 x 2160 Display Colours 16.7M Contrast ratio: 6000 : 1 Aspect Ratio 16 : 9 Movie: AVI, MPEG1/2, MPEG-4, TS, MKV, DIVX, MJPEG, H.264, Multimedia Playback H.263, AVS, AVS+, WMV3, HEVC Format under Music: MP3, WMA, AAC USB Mode Photo: JPEG, JPG Power Source 100-240V/50-60Hz Power Consumption <105W USB 5V max.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd VERSION: 1.
