User Manual

11
GETTING STARTED (Cont.)
LEVELLING THE APPLIANCE
IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure
the most accurate levelling of the appliance. This is a must if your floor in
unbalanced to level the washing machine.
• Make sure to position the appliance on a level and stable ground. If the
floor is uneven you can adjust the feet by twisting the feet. Make sure to
slightly incline the appliance first then adjust the leveling feet by
twisting it clockwise or counter clockwise depending if you are raising or
lowering the feet.
Note: Make sure to avoid direct sunlight onto the appliance.
• By placing a spirit level ontop of the appliance you can check correctly to
aid you in adjusting the feet levelling nuts to adjust the appliance to be
completely level.
IMPORTANT! Installing the bottom cover
• Make sure the power cord is unplugged from the mains
supply.
• Place some padding (such as a soft mat, blanket or thick
towel) on the floor and gently lay the washing machine
on the padding, back side down. Take care not to dent
the housing.
• Insert the bottom cover into the hooks of the leg, pushing
it straight until it reaches into the front hooks.
• Ensure to fasten the bottom cover with the supplied
screws.
• Carefully set the washer upright.