6KG FRONT LOAD WASHING MACHINE INSTRUCTION MANUAL MODEL: SC-600AU8FL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Getting Started 10 Levelling the appliance 11 Connecting the water inlet hose 12 Connecting the Drain Hose 13 Instructions 14 Operations 18 Cleaning and Maintenance 20 FAQs 24 Specifications 26 Customer Helpline 28
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Front Load Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) ELECTRICAL SAFETY • Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order. • Power connection: Do not use an adaptor or an extension cord. Plug the power plug directly into a separate power point that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed. • Power cord: Do not kink or damage the power supply cord.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard. • Only the filter requires regular cleaning, everything else is non user-serviceable parts. Do not try to repair, disassemble or modify the appliance.
PRODUCT OVERVIEW 8
PRODUCT OVERVIEW (Cont.) CONTROL PANEL 1. PROGRAMS 2. LED SCREEN DISPLAY 3. ON/OFF BUTTON 4. DELAY BUTTON 5. SPEED BUTTON 6. TEMPERATURE BUTTON 7.
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.
GETTING STARTED (Cont.) LEVELLING THE APPLIANCE IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate levelling of the appliance. This is a must if your floor in unbalanced to level the washing machine. • Make sure to position the appliance on a level and stable ground. If the floor is uneven you can adjust the feet by twisting foot then with a spanner you twist the lock nut to the top to lock it in place.
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. Minimum Inlet Water Pressure: 0.05MPa/Maximum Inlet Water Pressure: 1MPa Be sure to only use new hose sets when connecting the washing machine. Do not re-use old hoses. • Connect the inlet pipe as indicated, there are two ways of connecting the inlet pipe. 1. Connection between the Tap and inlet hose. 2.
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE Do not kink or protract the drain hose. Position the drain hose correctly otherwise damage will result in water leakage. There are two ways to place the end of drain hose: 1. Put it through the water trough. 2. Connect it to the branch drain pipe. When installing the drain hose into the laundry sink, make sure it is properly fitted with rope to hold it in place.
INSTRUCTIONS BEFORE FIRST USE • Before any first wash make sure everything is installed correctly. Make sure to do one wash with no items inside to clean out the tube before your first loaded wash. After the above steps have been completed, In a few simple steps shown below you can select the type of wash you want and get started.
INSTRUCTIONS (Cont.) • Make sure that the appliance is in a correct working temperature (0-40˚C). If the appliance is used under 0˚C the inlet valve and draining system may be damaged. • Make sure that all labels are checked on items if they can be washed. • Use non-foaming or less-foaming detergents which are more suitable for washing machines to wash correctly.
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols.
INSTRUCTIONS (Cont.) DETERGENT DISPENSER Only use low-subsiding detergents and clothing care preparations that are for use in a front load washing machine.
INSTRUCTIONS (Cont.) WASHING PROGRAMS TABLE • Energy test program: Cotton 60˚C, Speed: the highest speed; Other as the default. Half load for 6.0/5.0lg Machine: 3.0/3.75kg.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.
CLEANING AND MAINTENANCE (Cont.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DETERGENT DISPENSER 1 Press down the arrow location on the softener cover inside the washing machine dispenser. 2 Lift the clip up and take out the softener cover and wash all the grooves with water. 3 Restore the softener cover and push the drawer into position. NOTE Do not use alcohol, solvents or chemical products to clean the machine.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAIN PUMP FILTER 1 2 3 4 Be careful of the hot water. Allow the detergent solution to cool down. Drain pump filter can filter the yarns and small foreign matters from the washing. Clean the filter periodically to ensure the washing machine operates normally. CAUTION • Make sure that the valve cap and drain hose are reinstalled properly. Cap plates should be inserted aligning to hole plates otherwise water may leak.
FAQs Problem Possible Cause Solution Washing machine is not starting Door is not closed properly Restart after the door is closed, check if the clothes are stuck Door can’t be opened Washer’s safety protection is active Disconnect the power and restart the appliance Water Leakage The connection between inlet pipe or outlet hose is not tight check and fasten water pipes. Clean up outlet hose.
SPECIFICATIONS Power Supply 220-240V~50Hz Max Current 10A Standard Water Pressure 0.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd 28
