Installation Guide

8
4. INSTALLATION OF INDOOR UNIT
• Pass the connection wires, connecting pipelines and drain pipe through the wall hole.
• Hang the indoor unit on the hook of the top of the wall mounting plate so that the
hooks at the bottom of the indoor unit match the hook of the wall mounting plate.
5. INSPECTIONS
• Check if the hooks on the mounting plate and unit at the top or bottom are firmly fixed.
• Check that the indoor unit is properly level.
• The drain pipe should not curve upward (refer to picture below).
• The drain pipe should be at the lower part of the wall pipes. (refer to below).
INSTALLATION OF INDOOR UNIT (Cont.)