7KG & 3.5KG FRONT LOAD WASHER & DRYER COMBO INSTRUCTION MANUAL MODEL: SC-7350AU9FLCO Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Getting Started 10 Levelling the appliance 11 Connecting the water inlet hose 12 Connecting the Drain Hose 13 Instructions 15 Operations 18 Cleaning and Maintenance 21 FAQs 25 Specifications 26 Customer Helpline 28
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Front Load Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) To reduce risk of fire, electric shock or injury, always follow these basic precautions and accident prevention measures when using this appliance, including the below: NOTE: This appliance should be installed by an authorised technician else warranty will be void. INSTALLATION • The product is heavy, be careful when moving it. To avoid back or other injury, have 2 people lift or mechanical aid when installing.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) • The only part that can be changed is the filter, other than this nothing else in the dryer contains user serviceable parts. Do not open, disasseble or try to repair the appliance yourself. Only have this appliance serviced by a qualified technician. • Incorrect use can result in property damage, injury or death. We assume no liability for misuse of the appliance or noncompliance with these instructions.
GENERAL SAFETY INSTRUCTIONS (Cont.) CAUTION • Do not use the tumble dryer if industrial chemicals have been used for cleaning. • Do not dry unwashed items in the dryer. • Do not allow lint to accumulate around the tumble dryer. Clean the Lint Trap and Filter after every use. • Enough ventilation has to be provided to avoid the backflow of gases into the room from appliances burning other fuels including open fires. • Remove all objects from pockets such as lighters and matches.
PRODUCT OVERVIEW Top Cover Water Supply Hose Control Panel Power Cord Supply Detergent Dispenser Drum Door Drain Hose Service Filter Accessories Transport Hole Plug Supply Hose Cold Water 9
PRODUCT OVERVIEW (Cont.) CONTROL PANEL 1. On/Off button: Product is switched on or off 2. Start/Pause button: Press the button to start or pause the washing cycle. 3. Options: This allows you to select an additional function and will light when selected. 4. Programs: Available according to the laundry type. 5. LED Screen display: The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on rough the cycle.
OPERATIONS Option Pre Wash The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it. Extra Rinse The laundry will undergo extra rinse once after you select it. Speed Wash The function can decrease the washing time. Extra Wash Very dirty clothes can choose it, select it can increase the washing time / and intensity to increase the washing effect.
OPERATIONS (Cont.) Other Functions My Cycle Reload This operation can be executed during the washing progress. When the drum is still rolling and there is large amount of water with high temperature in the drum. The state is unsafe and the door cannot be opened forcefully. To press [Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway function. Please follow the steps as bellow: 1.Wait until the drum stops rotation. 2.The door lock is unlocked. 3.
OPERATIONS (Cont.) ( ) Memory of frequently used programmes Press [Spin]([Dry]/[Temp.]) 3sec. to memory the running programme. The default is cotton. Spin Press the button to change the spin speed. 1400: 0-600-800-1000-1200-1400 CAUTION: When the lights of spin speed (600,800,1000,1200,1400) are off means the spin speed is 0. Temp. Press the button to regulate the temperature (Cold, 20°, 30°, 40°, 60°, 90°) Child Lock To avoid mis operation by children. CAUTION Press the two button 3sec.
OPERATIONS (Cont.) Dry Press the Dry button continuously to choose the dry level: Extra Dry/Normal Dry/Gentle Dry/Air Dry. Extra Dry: Need to wear clothes immediately ,we can choose this function Normal Dry: The normal dry procedure Gentle Dry: Only to dry slightly and then is just ok .
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.
GETTING STARTED (Cont.) LEVELLING THE APPLIANCE IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate levelling of the appliance. This is a must if your floor in unbalanced to level the washing machine. • Make sure to position the appliance on a level and stable ground. If the floor is uneven you can adjust the feet by twisting foot then with a spanner you twist the lock nut to the top to lock it in place.
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. Minimum Inlet Water Pressure: 0.05MPa/Maximum Inlet Water Pressure: 1MPa Be sure to only use new hose sets when connecting the washing machine. Do not re-use old hoses. CONNECT THE INLET PIPE Connect the inlet pipe as indicated in the figure. There are 2 ways to connect the inlet pipe. INSTALL INLET PIPE 1.
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE Do not kink or protract the drain hose. Position the drain hose correctly otherwise damage will result in water leakage. There are two ways to place the end of drain hose: 1. Put it through the water trough. 2. Connect it to the branch drain pipe. When installing the drain hose into the laundry sink, make sure it is properly fitted with rope to hold it in place.
GETTING STARTED (Cont.) Electrical connection • As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your home can meet the normal loading requirements of the electrical appliances. • Please connect the power to a socket which is correctly installed and properly earthed. • Make sure the power voltage at your place is same to that in the machine’s rating label.
INSTRUCTIONS BEFORE FIRST USE • Before any first wash make sure everything is installed correctly. Make sure to do one wash with no items inside to clean out the tube before your first loaded wash. After the above steps have been completed, In a few simple steps shown below you can select the type of wash you want and get started. Detergent only need to be added in “case I “after selecting pre-washing for machines with this function.
INSTRUCTIONS (Cont.) • As for the agglomerated or ropy detergent or additive, before they are poured the detergent box, it is suggested to use some water for dilution to prevent inlet of detergent box from being blocked and overflowing while filling water. • Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption. • Make sure that the appliance is in a correct working temperature (0-40˚C).
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols. DETERGENT DISPENSER Only use low-subsiding detergents and clothing care preparations that are for use in a front load washing machine.
INSTRUCTIONS (Cont.) WASHING PROGRAMS TABLE Speed: the highest speed; Other as the default. • Half load for 7.0Kg machine:3.5Kg.
OPERATIONS PROGRAMS Select the desired programs according to the clothes that are being washed. PROGRAMS Cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Synthetic Wash synthetic articles such as shirts, coats, etc... While washing knitting textiles, detergent quantity should be reduced as it can easily form bubbles. Quick 15’ It is suitable for washing few clothes which are not very dirty quickly. Baby Care Baby care program with extra rinse.
OPERATIONS (Cont.) Refresh Rapid 45’ During this cycle, there is only hot air rather than water ejecting from inside the drum to wash the clothing. It is suitable for washing not very dirty clothes, save more energy and washing. MY CYCLE Save your most frequently used washing cycle as a favourite. To do this: 1. Press and hold Speed/Temp for 3 seconds while your desired cycle is in progress. 2. When starting a load of washing, Turn the dial to “My Wash” then “Start/Pause” to begin.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE INLET FILTER Washing the filter in the tap 1. Close the tap 2. Remove the water supply hose from the tap 3. Clean the filter 4. Reconnect the water supply hose Washing the filter in the washing machine 1. Screw off the inlet pipe from the back of appliance 2. Pull out the filter with long nose pliers and reinstall after being washed 3. Use the brush to clean the filter 4.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DETERGENT DISPENSER 1. Press down the arrow location on softener cover inside the dispenser drawer. 2. Lift the clip up and take out softener cover and wash all grooves with water. 3. Restore the softener cover and push the drawer into position.
FAQs Problem Possible Cause Solution Washing machine is not starting Door is not closed properly Restart after the door is closed, check if the clothes are stuck Door can’t be opened Washer’s Disconnect the power and restart safety protection the appliance is active The connection between inlet Water Leakage pipe or outlet hose is not tight check and fasten water pipes. Clean up outlet hose.
CLEANING AND MAINTENANCE (Cont.) • Drain problem while washing Water overflow Others 30 • Outlet hose is blocked or twisted Drain pump is blocked • • Wash and straighten outlet hose. Wash drain pump filter • Restart the washer • Please try again first or call the customer helpline (1300 296 699) if problems persists.
SPECIFICATIONS Power Supply 220-240V~50Hz Standard Water Pressure 0.05MPa~1MPa Washing Capacity 7KG Drying Capacity 3.5KG Rated Power 2100W Drying Power 1300W Max.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd VERSION: 2.
