User Manual

23
CLEANING AND MAINTENANCE (Cont.)
CLEANING THE DETERGENT DISPENSER
1. Press down the arrow location on the softener
cover inside the washing machine dispenser.
2. Lift the clip up and take out the softener cover and
wash all the grooves with water.
3. Restore the softener cover and push the drawer
into position.
CLEANING THE INLET FILTER
Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.
Clean the tap filter:
1. Close the tap.
2. Select any procedure except “Wash” or “Drain”
procedure.
3. Press the button “Start/Pause” and keep the
procedure running for about 40 seconds.
4. Remove the inlet pipe from the tap.
5. Use water to wash the filter.
6. Reconnect the inlet pipe. Washing the filter in
washing machine:
• Screw off the inlet pipe from the backside of the
machine.
• Pull out the filter with long nose pliers and re install
it back after being washed.
• Reconnect the inlet pipe.
• Open the tap and make sure there is no water
leakage.
• Close the tap.
NOTES: Generally, the tap filter is
washed first and then the filter in
washing machine will be washed.
If only the filter in washing
machine is washed, then the steps
1~3 in cleaning the tap filter shall
be repeated.
NOTE
Do not use alcohol, solvents or chemical products to clean the machine.