User Manual

CLEANING AND MAINTENANCE (Cont.)

CLEANING THE DRAIN PUMP FILTER

1 Be careful of the hot water.

2 Allow the detergent solution to cool down.

3 Drain pump filter can filter the yarns and small foreign matters from the washing.

4 Clean the filter periodically to ensure the washing machine operates normally.

CAUTION

• Make sure that the valve cap and drain hose are reinstalled properly.

Cap plates should be inserted aligning to hole plates otherwise water may leak.

• When the appliance is in use and depending on the program selected there

can be hot water in the pump. Never remove the pump cover during a wash

cycle, always wait until the appliance has finished the cycle and is empty.

When replacing the cover ensure it is tightly secured.

1.After the power is

disconnected, open the

filter cover.

2.Turn the filter down as

shown with the figure and

take out sundries matters.

3.Reinstall each part back

after sundries matters are

removed.