7.5KG FRONT LOAD WASHING MACHINE SC-750AU8FLG INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Getting Started 10 Levelling the appliance 11 Connecting the water inlet hose 12 Connecting the Drain Hose 13 Instructions 15 Operations 18 Cleaning and Maintenance 21 FAQs 25 Specifications 26 Customer Helpline 28
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Front Load Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) ELECTRICAL SAFETY • Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order. • Power connection: Do not use an adaptor or an extension cord. Plug the power plug directly into a separate power point that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed. • Power cord: Do not kink or damage the power supply cord.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard. • Only the filter requires regular cleaning, everything else is non user-serviceable parts. Do not try to repair, disassemble or modify the appliance.
PRODUCT OVERVIEW Detergent Box Control Panel Detergent Drawer Power Plug Door Outlet Hose Accessories Transport Hole Plug 8 Inlet Pipe C
PRODUCT OVERVIEW (Cont.) CONTROL PANEL 1. Program knob 2. LED Screen display 5. Speed button 3. On/Off button 6. Temperature button 4. Delay button 7. Start/Pause button .. There are 16 types of washing Les sconsumption More e fficiency selection functions in display. For example: • Pres s 3 sec .
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.
GETTING STARTED (Cont.) LEVELLING THE APPLIANCE IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate levelling of the appliance. This is a must if your floor in unbalanced to level the washing machine. • Make sure to position the appliance on a level and stable ground. If the floor is uneven you can adjust the feet by twisting foot then with a spanner you twist the lock nut to the top to lock it in place.
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. Minimum Inlet Water Pressure: 0.05MPa/Maximum Inlet Water Pressure: 1MPa Be sure to only use new hose sets when connecting the washing machine. Do not re-use old hoses. CONNECT THE INLET PIPE Connect the inlet pipe as indicated in the figure.
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE Do not kink or protract the drain hose. Position the drain hose correctly otherwise damage will result in water leakage. There are two ways to place the end of drain hose: Max.100cm Min.60cm Max.100cm 2. Connect it to the branch drain pipe. Min.60c m 1. Put it through the water trough. When installing the drain hose into the laundry sink, make sure it is properly fitted with rope to hold it in place.
GETTING STARTED (Cont.) Electrical connection • As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your home can meet the normal loading requirements of the electrical appliances. • Please connect the power to a socket which is correctly installed and properly earthed. • Make sure the power voltage at your place is same to that in the machine’s rating label.
INSTRUCTIONS BEFORE FIRST USE • Before any first wash make sure everything is installed correctly. Make sure to do one wash with no items inside to clean out the tube before your first loaded wash. After the above steps have been completed, In a few simple steps shown below you can select the type of wash you want and get started.
INSTRUCTIONS (Cont.) • Make sure that the appliance is in a correct working temperature (0-40˚C). If the appliance is used under 0˚C the inlet valve and draining system may be damaged. • Make sure that all labels are checked on items if they can be washed. • Use non-foaming or less-foaming detergents which are more suitable for washing machines to wash correctly.
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols. DETERGENT DISPENSER Only use low-subsiding detergents and clothing care preparations that are for use in a front load washing machine.
INSTRUCTIONS (Cont.) WASHING PROGRAMS TABLE Must Optional Not Necessary • *Cotton 60°C, spin speed 1400 is the standard washing programs to which the information in the energy efficiency label relates, and they are suitable to clean normal soiled cotton laundry and they are the most efficient programs in terms of energy and water consumption for washing that type of cotton laundry, the actual water temperature may differ from the declared cycle temperature.
OPERATIONS PROGRAMS Select the desired programs according to the clothes that are being washed. PROGRAMS Cotton Intensive Hard-wearing textiles, heat-resistant textiles made of cotton or linen for extended time. Cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Quick 15’ It is suitable for washing few clothes which are not very dirty quickly. Eco Wash Saves energy and the maximum temperature for this program is 40°C. Use to wash few clothes that are not very dirty.
OPERATIONS (Cont.) MY CYCLE Save your most frequently used washing cycle as a favourite. To do this: 1. Press and hold Speed/Temp for 3 seconds while your desired cycle is in progress. 2. When starting a load of washing, Turn the dial to “My Wash” then “Start/Pause” to begin. CHILD SAFETY LOCK: Press and hold “Delay” & “Speed” until light activates child safety lock. Press and hold both buttons again to de-activate.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE INLET FILTER Washing the filter in the tap 1. Close the tap 2. Remove the water supply hose from the tap 3. Clean the filter 4. Reconnect the water supply hose Washing the filter in the washing machine 1. Screw off the inlet pipe from the back of appliance 2. Pull out the filter with long nose pliers and reinstall after being washed 3. Use the brush to clean the filter 4.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DETERGENT DISPENSER 1. 2. 3. Press down the arrow location on the softener cover inside the washing machine dispenser. Lift the clip up and take out the softener cover and wash all the grooves with water. Restore the softener cover and push the drawer into position. CLEANING THE INLET FILTER Inlet filter shall must be cleaned if there is not any or insufficient water in when the tap is opened. Clean the tap filter: 1. Close the tap. 2.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAIN PUMP FILTER 1 2 3 4 Be careful of the hot water. Allow the detergent solution to cool down. Drain pump filter can filter the yarns and small foreign matters from the washing. Clean the filter periodically to ensure the washing machine operates normally. 1.After the power is disconnected, open the filter cover. 2.Turn the filter down as shown with the figure and take out sundries matters. 3.Reinstall each part back after sundries matters are removed.
FAQs Problem Possible Cause Solution Washing machine is not starting Door is not closed properly Restart after the door is closed, check if the clothes are stuck Door can’t be opened Washer’s safety protection is active Disconnect the power and restart the appliance Water Leakage The connection between inlet pipe or outlet hose is not tight check and fasten water pipes. Clean up outlet hose.
SPECIFICATIONS 26 Power Supply 220-240V~50Hz Standard Water Pressure 0.05MPa~1MPa Washing Capacity 7.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd
