User's Manual

Press button to select the position of the table, an
Channel No.: Show and select the channel.
Channel Label: Allow you to setup a label for the channel.
d press button to select the
words.
DTV Signal: Show the quality of digital signal: good, Normal, Bad.
Show/Hide: Allow you to show or hide the channels.
Use button to highlight the desired item, then press button to show or
OK
hide the highlighted channel.
24
/
/
/
Use button to highlight the desired item, then press
Description
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel
Label and DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
If you select “Cable” as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use button to highlight the “Start to Scan”, then press
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
If you select “Air” as input signal in Antenna item, you
can press button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC
mode, please wait patiently.
OK button to add or remove the highlighted channel as
favorite.
Favorite: Allow you to add these channels which you desired
as the favorite channels.
/