USER MANUAL SE60GY24 En Read the User Manual carefully before using the TV and keep it for further reference.
CONTENTS CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation What's Included Front View Rear View Installing the Base Stand Removing the Stand for Wall-Mounting Remote Control 4 4 5 6 7 7 8 Connecting External Devices 9 Customizing TV Settings Initial Setup Navigating the On screen Display Selecting Input Source Picture Settings Audio Settings Time Settings Setup Settings Lock Settings Channel Settings 10 10 11 12 12 13 14 15 16 17 Parental Control 18 Troubleshooting 20 2
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION PREPARATION What is Included TV Set Remote Control with Batteries Mount Stand 4 Base Stand Ten Screws User Manual Quick Start Guide User Manual Quick Start Guide
PREPARATION Front View 1. VOL +/Press to adjust the volume. 2. CH Press to select a channel. 3. MENU Display the OSD (on screen display) menu. 4. SOURCE Press to select among different input signal sources. 5. POWER Switch the TV between On / Standby mode. 6. IR (Infrared Receiver) Receive IR signals from the remote control. 7. POWER Indicator Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode.
PREPARATION Rear View 1. Power Cord Connect to AC power outlet. 2. USB Port only,cannot play Update multimedia 3. HDMI Inputs (HD) signal Connect to a output device. 4. VGA Input Connect to a computer or other devices with a VGA interface. 5. PC AUDIO Input Connect to a computer audio output. 6. COMPONENT Input Connect to AV devices with component (Y/Pb/Pr) video and audio output sockets. 7. AV Input Connect to the composite VIDEO and AUDIO (L/R) output sockets on external video devices. 6 8.
PREPARATION Installing the Stand • 1. Lay the TV face-down on a flat, cushioned surface to avoid the screen from damage or scratches. • 2. Fix the Base Support to the Base Stand using 4PCS screws. • 3. Fix the base assembly to the main unit using 6PCS provided screws. 2 1 • Lay the TV face-down on a flat, cushioned surface to avoid the screen from damage or scratches. • Untighten the 6PCS screws holding the stand assembly and remove them.
PREPARATION Remote Control 1. 1 2 2. 3. 4. 5. 6. 3 7. 4 6 5 7 8 9 10 12 11 14 13 15 17 16 18 19 8. 9. 10. 11. 12. 13. 14. 15. 20 21 22 23 25 24 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 8 : Switch the TV between on and standby mode : Mute and restore your TV sound 0~9: Select a program (ATV/DTV mode) --: Enter multiple program channel number such as 2-1 : Return to previous viewing channel P.MODE: Select picture mode: dynamic/ movie/energy saving/user/standard S.
CONNECTING EXTERNAL DEVICES CONNECTING EXTERNAL DEVICES OR HDMI Device Headphone Digital Audio System Audio Cable (not included) RF Cable (not included) HDMI Cable (not included) Coaxial Cable (not included) 3.
CUSTOMIZING TV SETTINGS CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on; it will go into the Setup Wizard.
CUSTOMIZING TV SETTINGS • If channels cannot be found, this frame will be displayed automatically. Navigating the On-screen Display • Press the MENU button to display the main menu. • Use buttons to navigate and select the available menus.
CUSTOMIZING TV SETTINGS Selecting Input Source • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. buttons to select your • Press desired input source among: TV/AV/ Component/HDMI1/HDMI2/HDMI3/ VGA and then press OK button to Picture Settings • Press the MENU button on the main unit or on the remote control and then press buttons to select PICTURE menu.
CUSTOMIZING TV SETTINGS Audio Settings • Press the MENU button on the main unit or on the remote control and then buttons to select AUDIO press menu. • Press buttons to select the following audio options and then press the button to adjust each option’s setting. Sound Mode Bass Treble Balance Surround Sound Auto Volume SPDIF Mode Audio Language Allow the selection of an audio-enhancement technique: Standard/Music/Movie/User. Alternative: you may press the S.MODE button to select the sound mode directly.
CUSTOMIZING TV SETTINGS Time Settings • Press the MENU button on the main unit or on the remote control and then buttons to select TIME press menu. • Press buttons to select the following time options and then press button to adjust each option’s setting. Sleep Timer Time Zone Daylight Saving Time 14 Select a period of time after which the TV automatically switches to standby mode: OFF/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly.
CUSTOMIZING TV SETTINGS Setup • Press the MENU button on the main unit or on the remote control and then buttons to select SETUP press menu. • Press buttons to select the following setup options and then button to adjust each press the option’s setting. Menu Language Transparency Zoom Mode Noise Reduction Advanced Closed Caption DLC Restore Default Select menu language : English, French or Spanish. The default on-screen menu language is English. Select to turn On/Off transparency function.
CUSTOMIZING TV SETTINGS Lock Settings • Press the MENU button on the main unit or on the remote control and then buttons to select LOCK press menu. • Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press buttons to select the following options and then press the buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Channel Settings • Press the MENU button on the main unit or on the remote control and buttons to select then press CHANNEL menu. • Press buttons to select the following channel options and then button to adjust each press the option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel No. Channel Label DTV Signal Select antenna between Air and Cable. First, select your cable system from Auto/STD/IRC/HRC.
PARENTAL CONTROL PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HD Compatible Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Brightness (Centre Typ.) Cd/M² Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 60 inch diagonally LED TFT 60 Hz 1080P Up to 1080P 1920 x 1080 16:9 3000:1 400 4 ms 30.
SEIKI LED TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER 55 inches and Above Screen Size Models (the “Product”) This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by SEIKI DIGITAL INC. (SEIKI) to the original consumer purchaser against defects in material and workmanship (“Warranty”) as follows: 1.
