User's Manual

14
The Target Projector is Not Found
Action 1. Restart the computer.
Action 2. Check if the projector network settings are set to "Quick
Connection Mode". See the documentation supplied with the
projector for more details.
Action 3. Check the following if actions 1 and 2 do not help.
(If it is disconnected, check the following.)
Please note that the projector cannot be found if the wireless LAN method
for the projector and the computer's wireless LAN card do not much, as
shown in the following examples.
Example) Projector: IEEE 802.11a Computer: IEEE 802.11b/g (a is not
compatible)
You can modify the wireless LAN method for the projector from
"Network" in the projector's configuration menu. See the documentation
supplied with the projector for more details.
Is the indicator on the
wireless LAN unit
flashing?
Reinstall the wireless LAN
unit.
Are you using
commercially available
firewall software?
Create a firewall exception
for EMP NS Connection in
the firewall software you are
using.
Are any of the supplied
utilities operating from
the computer's wireless
LAN card?
Close the utility and restart
EMP NS Connection.
Contact your local dealer or the nearest
address provided in the Support and
Service Guide supplied with the projector.
Not flashing
Flashing
Yes
No
Yes
No