User's Manual

Watch Power Saving Functions
This product is equipped with power saving functions to limit battery
power consumption.
There are two types of power saving functions, with each used when
certain conditions are met.
Note that while the hour and minute hands will stop moving, this does
not indicate damage to the product.
■
Power Saving 1
The watch will go into “Power Saving 1” mode when
kept away from light for at least 72 hours. In this
mode the short seconds hand will stop at the 15
seconds mark. All other displays besides the short
seconds hand will also stop.
The clock will start again showing the current time
after exposing the watch to light for at least fi ve
seconds, or by pressing a button.
■
Power Saving 2
The watch will go into “Power Saving 2” mode when
in a poor state of charge. In this mode the short
seconds hand will stop at the 45 seconds mark.
Provide a suffi cient charge to the watch and then
readjust the time as necessary.
Remaining Battery Power for the Accessory
[Battery] will start fl ashing when the accessory is
low on battery charge. We recommend replacing
the battery as soon as possible. (User’s Guide)