User's Manual

180°
When performing the fi rst calibration the short seconds hand will move from
the 0 seconds mark to the 30 seconds mark.
4
Rotate the watch 180 degrees as accurately as possible while
keeping the watch level
5
Keep the watch as it is in step
4
and press and release the “C”
button once more
When performing the second calibration the short seconds hand will point to
[Y].
Reference
If the short seconds hand points to [N] check to see if there any products
giving of a strong magnetic discharge nearby, or if you are in an area with
a strong magnetic fi
eld. Following this, press and release the “C” button
again and repeat this process from step
3
.
If the short seconds hand continues to point to [N] even after repeated
calibration attempts, please contact our customer support center.