Printer User Manual

viii
Handling Precautions
Power Supply
1. Install the printer near an easily accessible electrical outlet.
2. Do not provide power to the printer through the same power
line as for noise-generating devices, such as a motor.
3. Use the power supply matched with the specification of the
printer.
4. Connect the power cable to an electrical outlet. Do not plug
several devices into one electrical outlet.
Printer
1. Do not place anything on top of the printer. Do not rest your
elbows on the printer.
2. Open and close the top cover gently from the front of the printer
with both hands.
3. Before connecting or disconnecting the interface connector, turn
the printer off.
4. Do not clean the surface of the cover with benzene or paint
thinner. The coating may come off or deteriorate.
Wipe the cover clean with a soft cloth. If the cover is very dirty,
use a cloth moistened with a neutral detergent.
5. Do not touch the ink-jet head surface.
Regular Inspection and Maintenance
The following regular inspection and maintenance must be
performed in terms of characteristics of solvent ink.
1. Clean the capping unit every day.
2. Check moisture of wipper sponge every day.
3. Perform the head cleaning every one month.
4. Perform the service cleaning when leaving the printer for long
time (2 weeks or more at power off state.)
5. Perform the head wash and the ink charge before printing when
leaving the priner for long time.
See pages 2-48 and 2-59 for regular inspection and maintenance.