Printer User Manual

3-22
(11) Paper setting mode (PAPER SET MODE)
Detects the edge of the paper when replacing or setting the paper,
and selects whether the paper should be returned to the waiting
position.
When the winder is effective, the paper will not be returned to the
waiting position regardless of this setting.
<Parameter (Enter a choice)>
- NORMAL :Detects the paper width when replacing or setting
the paper, and then completes the paper setting after
checking paper skew during paper feeding.
-SAVING: Detects the paper width at replacing or setting the
paper and then completes the paper setting after
detecting the edge of the paper during paper
rewinding.
Usually set "NORMAL" when selecting "SAVING," take care
of the followings.
- Cut the edge of the paper so that the edge of the paper is
parallel to the guide line and set it to the printer.
If the edge of the paper is not parallel, the print is missed on
the edge of the paper and the platen is stained by ink and
the paper jam is caused.
- Set the paper after checking no wrinkle on the edge of the
paper.
If using the paper with a wrinkle, it causes paper jam.
- Set the paper after checking no tape or glue or the edge of
the paper. If using the paper with tape or glue, it causes
paper jam.
#PAPER SET MODE
>01 : NORMAL
NOTE