Printer User Manual

2-13
Section 2 Basic Operations
Replacing the Paper Roll
(Paper setting direction)
Flange
Paper
Flange
Paper
<Outside rolling>
<Inside rolling>
NOTE
6
Feed the paper until a buzzer sounds from the paper feeder.
Feed the paper until an edge of the paper goes out 200 mm or more from the
paper outlet.
- Paper may stick to the paper feeder and is hard to set due to
operational condition especially low humidity. In such a case,
float paper from the paper feeder and set paper to the paper
feeder by holding both edges of the paper.
- Be sure not to hit the edge of the paper roll by the rear cover.
- Be sure that the media edge guard is not set under the paper.
(See page 2-45 Using the Media Edge Guard.)