Printer User Manual

[Notes]
l The transmitted status is only one byte and the data is as shown
in the following table.
l If nothing is connected with Drawer kick-out connector, bit 0 of n
is always “1".
l When DTR/DSR control is selected, one byte is transmitted af-
ter confirming that the host computer is ready to receive data
(DSR is SPACE).
l When XON/XOFF control is selected, one byte is transmitted
without checking the DSR signal.
l When DTR/DSR control is selected, if the host computer is not
ready to receive data (DSR is MARK), the printer waits until it
becomes ready.
Value
Bit
Function
0 1
0 Pin 3 level
"LOW"
"HIGH"
1
Undefined
2
Undefined
3
Undefined
4
Unused
Fixed to 0
5
Undefined
6
Undefined
7
Undefined
ESC v
[Name]
Transmit printer status
[Format]
<1B>H<76>H
[Description]
The current printer status is transmitted to the host computer.
[Notes]
l The transmitted status is only one byte and the data is as shown
in the following table.
l When DTR/DSR control is selected, one byte is transmitted af-
ter confirming that the host computer is ready to receive data
(DSR is SPACE).
l When XON/XOFF control is selected, one byte is transmitted
without checking the DSR signal.
l When DTR/DSR control is selected, if the host computer is not
ready to receive data (DSR is MARK), the printer waits until it
becomes ready.
41