User`s guide

3-31
Operation panel of menu operation
q Explanation of each menu operation
3
(16) COLOR STRIPE
Select whether the color stripe is printed or
not.
<Parameter (selection input)>
ON The color stripe is added.
OFF The color stripe is not added.
- When experiencing loss of print data (clogged nozzles) on long prints. Add the color
stripe and print.
- Irrespective of this setting, the color stripe is added in the various adjustment patterns in
the oine mode.
- When the color stripe to ON, the print region becomes narrower by about 20 mm.
(17) IMAGE GRADIENT
Set the image gradient.
<Parameter (selection input)>
NORMAL Use this usually.
HIGHLIGHT1 Use this when the edge of the printed image is blurred.
HIGHLIGHT2 Use this when the symptom is not improved with HIGH-
LIGHT1.
Note
- The image quality improvement decreases the print speed as follows com-
pared to IMAGE GRADIENT NORMAL.
HIGHLIGHT1: 0% to 24% of the image quality at IMAGE GRADIENT NORMAL.
HIGHILIGHT2:
20% to 35% of the image quality at IMAGE GRADIENT NORMAL.
- For applying IMAGE GRADIENT and checking its eect, refer to [How to get good image
quality] (
P.5-15)
(18) PH HEIGHT VAL
Select the head height.
<Parameter (selection input)>
NORMAL Use this setting in normal operation.
HIGH Use this setting when the carriage is set to the HIGH position.
Note
- Select when changing the head height at the printer side. ( P.2-44)
#COLOR STRIPE
>XX:ON
XX : Selected media number
#IMAGE GRADIENT
>XX:NORMAL
XX : Selected media
#PH HEIGHT VAL
>XX:NORMAL
XX : Selected media