User`s guide

4-22

Pull out the Wiper blade while lifting

upward.

Pinch the rubber portion of a new

Wiper blade with tweezers and insert

straightly the Wiper blade from the top.

Finally, install it so that the plastic projection

is hooked to the hole of rubber portion.

Note

- The front and back of the wiper are the same.

- As the upper portion of Wiper blade touches directly the Print head, do not

touch it by hand or pinch it with tweezers when handling.

Upper portion of Wiper blade

Close the Cap cover and the Front cover.

Select [

YES] and press key to nish.

Note

- The printer automatically tracks the time the Wiper blade is used and displays

the message prompting to replace the Wiper blade. If a new Wiper blade is

installed and [*YES] is set, the value of accumulator is reset.

#REPLACE FINISHED

YES