User`s guide
2-39
2
Basic Operation
How to use the origin setting function
<Origin setting function>
When printing a small image is printed on the “64” width media, a large margin is
created as shown below.
By returning the printed media and re-setting the origin of print start, another im-
age may be printed in this margin.
Re-setting the origin of print is called [Origin setting function]
<Procedure of how to use the origin setting function>
1
Return the media by operating [Back Feed].
(
P.2-38 Rewind the media [Back Feed])
Note
- Return the media only after the printed image completely dries. The rst printed
image will be damaged if this function is used before it is suciently dry.
2
Press and hold the “ ” key for 1.5
seconds in the online state (idle mode),
the carriage moves and the origin setting
becomes ready
Align the [i] label on the carriage front with
the origin.
NEST ORIGIN SETTING
*
OK ?
(First print)
(Return of media)
(Second print)
Margin Set the origin
[ ] Label