User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 11 -
When the AC cable is used
WARNING
Unplug the AC cable if the AC adapter or the charger is damaged.
If not, it might cause fire, an electricshock, or a failure.
Keep the AC adapter and the AC cable of the charger away from dust and metallic
powders.
If not, it might cause fire or an electricshock.
Plug the AC adapter and the AC cable of the charger completely.
If not, it might cause fire or an electricshock.
NEVER damage the AC adapter and the AC cable of the charger. DO NOT bent the AC
cable forcibly, DO NOT place any heavy goods on it, DO NOT pull it, and DO NOT twist
it.
If not, it might cause fire, an electricshock, or a failure.
Always use the dedicated AC cable in the AC adapter and the charger. Use the
respective AC cable specified by country and block shown below.
In Japan: Model CB-JP01-18A
In North America: Model CB-US01-18A
In EU: Model CB-CE01-18A