User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 21 -
QConnecting the AC Adapter (Optional Unit)
(1) Connect the AC cable to the AC adapter.
(2) Open the interface cover and insert the DC jack of the AC adapter into the power connector of the
printer.
(3) Insert the AC plug of the AC cable into the electric outlet.
(4) The printer turns on automatically.
Hint
•
The AC adapter may be heated to some extent during operation. There is no problem.
AC cable
AC adapter