User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 38 -
9. CHARGING THE BATTERY PACK
Immediately after purchasing or leaving the printer unused for long periods of time, charge the battery
pack before use.
This battery pack does not need to be used up or discharged before charging.
The battery pack can be charged when it is installed in the printer connected with an AC adapter. The
battery pack can also be charged by a dedicated battery charger.
QCharging the Battery Pack in the Printer
An AC adapter and an AC cable are needed to charge the battery pack in the printer.
(1) Turn the printer off.
(2) Install the battery pack in the printer.
(3) Connect the AC adapter to the printer.
(4) Connect the AC cable to the AC adapter and insert the AC plug of the AC cable into the wall outlet.
(5) The printer turns on automatically and starts charging the battery.
(6) The POWER lamp continues to light orange while charging. When charging is completed, the
POWER lamp lights green. The charging time depends on the ambient temperature and the voltage
level of the battery pack.
Hints
•
The printer can print or receive data while it is charging the battery pack.
•
To interrupt charging, turn the printer off. To start recharging, turn the printer on as it
is.