User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 3 -
Warning on the Printer
WARNING
If you find any of the following abnormalities in the printer, power off the printer, unplug
the AC cable, and remove the battery pack from the printer.
♦ When an unusual state was not returned to the normal’s.
♦ When the printer gave out a nasty smell or smoke, or generated noise.
♦ When metallic powders, water or other foreign substances entered the printer.
♦ When the printer case was broken.
If not, it might cause fire or an electricshock. Please ask your dealer for repair.
NEVER put metallic powders, water or other foreign substances into the printer from its
opening.
If not, it might cause fire or an electricshock.
NEVER disassemble or remodel the printer. DO NOT try to repair the printer yourself.
If not, it might cause fire, an accident or failure.
DO NOT use any power supply other than our dedicated AC adapter and battery pack.
If not, there is fear of burst, ignition, or generation of heat that might cause fire or an
accident.
Power off the printer, when you attach and detach the battery pack to and from the
printer.
If not, it might cause an electricshock.