Cal. 7T62 INSTRUCTIONS (P. BEDIENUNGSANLEITUNG (S. 20) 3) INSTRUCTIONS (P. 37) ISTRUZIONI (P. 54) INSTRUCCIONES (P. 71) INSTRUÇÕES (P.
English You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T62. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference. Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 7T62. Bitte lesen Sie diese Bedienungsanleitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf. Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. 7T62.
Page SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........ SETTING THE DATE ................................................................................................ STOPWATCH ........................................................................................................... SINGLE-TIME ALARM ............................................................................................. TACHYMETER ...................................................................................
English CAL. 7T62 ■ TIME/CALENDAR ■ SINGLE-TIME ALARM Can be set to ring only once at a designated time within the coming 12 hours. ■ STOPWATCH Measures up to 60 minutes in 1/5 second increments. Split time measurement is possible.
● This watch is so designed that the following are all made with the crown at the second click position: 1) main time setting 2) alarm hand adjustment 3) stopwatch hand position adjustment Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the same time. If needed, 3) should also be adjusted then. CROWN English SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION Pull out to second click when the second hand is at the 12 o’clock position. 1.
English 1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”. 2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn to indicate the current time. 3.
✩ If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them to the “0” position. STOPWATCH 1/5-second hand STOPWATCH minute hand A A ▼ B 6 ▼ B A ▼ B ▼ English 3. STOPWATCH HAND POSITION ADJUSTMENT Press for 2 seconds. * STOPWATCH minute hand turns a full circle. Press repeatedly to set STOPWATCH minute hand to the “0” position. * The hand moves quickly if button B is kept pressed. Press for 2 seconds. * STOPWATCH 1/5-second hand turns a full circle.
English ▼ ● ALARM and STOPWATCH hands can be readjusted in the following order by pressing button ▲ STOPWATCH minute hand * STOPWATCH minute hand turns a full circle. ▼ CROWN 8 ▲ * ALARM hands advance 12 hours. for 2 seconds. ▲ ALARM hands A STOPWATCH 1/5-second hand * STOPWATCH 1/5second hand turns a full circle. * After all the adjustments are completed, check that the main time and alarm hands indicate the same time. Push back in to normal position in accordance with a time signal.
SETTING THE DATE CROWN ➠ 6 English ● Before setting the date, be sure to set the main time. Pull out to first click. ▼ Turn clockwise until the desired date appears. ▼ Push back in to normal position. ➠ Date 1. It is necessary to adjust the date at the end of February and 30-day months. 2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly. 3. Do not press button B when the crown is at the first click position, as this will move the ALARM hands.
English STOPWATCH ● The stopwatch can measure up to 60 minutes in 1/5-second increments. ● After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours. A STOPWATCH minute hand STOPWATCH 1/5-second hand 6 B ✩ Before using the stopwatch, be sure to check that the crown is set at the normal position and that the STOPWATCH hands are reset to the “0” position.
STOP ○ ○ ○ ○ RESTART A B ▼ A ▼ A ▼ ▼ A START STOP RESET English Accumulated elapsed time measurement * Restart and stop of the stopwatch can be repeated by pressing button A. START SPLIT ○ ○ ○ ○ SPLIT RELEASE A B ▼ B ▼ B ▼ A ▼ Split time measurement STOP RESET * Measurement and release of split time can be repeated by pressing button B.
English SINGLE-TIME ALARM ● The alarm can be set to ring only once at a designated time within the coming 12 hours. ● The alarm time can be set in one minute increments. ALARM TIME SETTING ✩ Before using the alarm, check that the ALARM hands are adjusted to the current time. (See “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”) ➠ 6 CROWN ▼ B ➠ B ALARM hour hand ALARM minute hand ▼ CROWN Pull out to first click. Press repeatedly to set the desired alarm time.
English 1. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time. While you keep button B pressed to advance the ALARM hands quickly, they stop when they indicate the current time and the alarm is disengaged. In that case, release button B, and then, press and hold the button again to set the ALARM hands to the desired time. 2.
English ● HOW TO CANCEL THE ALARM TIME YOU HAVE SET ➠ 6 ➠ B CROWN ▼ B ▼ CROWN Pull out to first click. Press and hold until ALARM hands stop and indicate the current time. Push back in to normal position. * To correct the alarm time you have set, follow the procedure described in “ALARM TIME SETTING”.
To measure the hourly average speed of a vehicle 1 2 Use the stopwatch to determine how many seconds it takes to go 1 km or 1 mile. Tachymeter scale indicated by STOPWATCH second hand gives the average speed per hour. English TACHYMETER (for models with tachymeter scale on the dial) Ex. 1 STOPWATCH second hand: 40 seconds Tachymeter scale: “90” “90” (tachymeter scale figure) x 1 (km or mile) = 90 km/h or mph ● Tachymeter scale can be used only when the time required is less than 60 seconds. Ex.
English To measure the hourly rate of operation 1 2 Use the stopwatch to measure the time required to complete 1 job. Ex. 1 STOPWATCH second hand: 20 seconds Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs accomplished per hour. Tachymeter scale: “180” “180” (tachymeter scale figure) x 1 job = 180 jobs/hour Ex.
BATTERY CHANGE Years The miniature battery which powers your watch should last approximately 3 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO SR927W battery.
English WARNING ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. CAUTION ● Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire. The battery may burst, become very hot or catch fire. ● The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery.
SPECIFICATIONS Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second) 2 Loss/gain (monthly rate) ............................ ± 15 seconds at normal temperature range (5° C ~ 35° C) (41° F ~ 95° F) 3 Accuracy of the alarm ............................... ± 1 minute 4 Operational temperature range ................. –10° C ~ +60° C (14° F ~ 140° F) 5 Driving system ..........................................
