User Guide

Installing the ribbon cassette

Turn OFF the printer's power and before the installation. However, the power should remain ON if

data is in the printer waiting to be printed.

1. Open the printer cover.

2. Manually move the print head to the extreme right side of the printer for easy installation of the

ribbon. Do not try to move the print head if the power is on.

3. Turn the ribbon feed knob in the direction of the arrow on the knob to remove any slack in the

ribbon.

4. Place the ribbon cassette on the left and right cassette holders, such that the ribbon rests on the

ribbon guide. Check to be sure that the ribbon drive shaft on the left cassette holder is inserted in the

hole on the bottom of the ribbon cassette.

5. Turn the ribbon feed knob in the direction of the arrow on the knob to remove any slack in the

ribbon.

6. Replace the front printer cover and set the head adjustment lever to the proper position for the best

print quality.

Cassette Holders

Ribbon Guide

Ribbon Mask

Cassette Holder

2. Setting up

CAUTION

Do not touch the print head if the printer has been running for a long time. Wait

until the print head is cooled off.

Remove any slack from ribbon

Ribbon Feed Knob