User Guide

Tearing off a form

(Used only with fanfold paper)

This function is activated by the TEAR OFF key and feeds fanfold paper so that the

perforation is aligned with the paper cutter located at the top rear of the printer, thus enabling

simple paper tearing. During the tear off operation, the FF, PARK, M.LF, and M.RLF keys

are the only active keys and are used to correctly align the paper to the paper cutter.

After tearing off the form, pressing the TEAR OFF key a second time reverse feeds the paper

to the top of the next available form.

Paper Cutter

Pressing the TEAR OFF key (or the ONLINE key) the second time may return the paper to

the original print position when the top edge of the form does not pass above the paper

cutter prior to the first TEAR OFF operation.

Note

3. Control panel and operations