User guide

Continue to press Button C (3 seconds)
within approximately 5 seconds after
operation of 1.
2
Press Button B and then release
it.
In-flight mode (
) setting
automatically ends after 5 seconds
1 3
19
ASTRON 7X52 GPS SOLAR
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
CONTENTS
Press for
3 seconds.
4
ボタンC
3秒押し
<
In-flight mode ( )
>
The indicator hand points to .
<
In-flight mode ( ) state
>
The indicator hand points to .
When the in-flight mode (
) is
brought about, the indicator
hand points to
even after
the watch has returned to the
time display mode.
When boarding (in-flight mode ( ))
 When 5 seconds or longer have elapsed after operation of 1, the watch automatically returns to the
time display mode. When the watch returned to the time display mode, restart operation from 1.
In-flight mode ( )
Set to the in-flight mode ( )
where the reception may influence
operation of other electronics devices
in an airplane, etc.
In the in-flight mode (
), the
GPS signal reception (time zone
adjustment, manual time adjustment,
and automatic time adjustment) does
not work.
Set to the in-flight mode ( ).
Start operation of 2 within 5 seconds after operation of 1.
The second hand indicates the
reception result (Y or N), and the
indicator hand points to the type
of reception (1 or 4+).
The second hand stops at the 40-second
position, and the indicator hand points to
.
The watch returns to the time display
mode.
 To set the watch to the local time of the
destination in an airplane, etc. (Manual
time zone setting) P. 20
Reset the in-flight mode ( ).
Carry out operation of 1 to 3.
In 2, when the indicator hand points to “● ON” in the figure at
the right, the in-flight mode ( ) can be reset.
Press
once and
release it.
 When the in-flight mode ( ) is reset, the
indicator hand indicates the charging status.