User Guide

English
27
TO PRESERVE THE QUALITY OF YOUR WATCH
Your watch works with stable accuracy within a
temperature range of 5°C and 35°C (41°F and 95°F).
Temperatures over 60° C (140° F) or below –10°
C(+14° F) may cause a slight time loss or gain or
battery leakage or shorten the battery life.
However, the above conditions will be corrected
when the watch returns to normal temperature.
■ TEMPERATURES
+60°C
-10°C
■ SHOCKS & VIBRATION
Be careful not to drop your watch or hit it against
hard surfaces.
■ MAGNETISM
N
S
Your watch will not be affected by magnetism.
■ CHEMICALS
Be careful not to expose the watch to solvents,
mercury, cosmetic spray, detergents, adhesives or
paints. Otherwise, the case, bracelet, etc. may
become discolored, deteriorated or damaged.
■ CARE OF CASE AND BRACELET
To prevent possible rusting of the case and bracelet,
wipe them periodically with a soft dry cloth.
■ PERIODIC CHECK
2 - 3
Years
It is recommended that the watch be checked once
every 2 to 3 years. Have your watch checked by
an AUTHORIZED SEIKO DEALER or SERVICE
CENTER to ensure that the case, buttons, gasket
and crystal seal remain intact.
■ PRECAUTION REGARDING
CASE BACK PROTECTIVE FILM
If your watch has a protective film and/or a sticker
on the case back, be sure to peel them off before
using your watch.
The IC (Integrated Circuit) used in your watch will
be affected by static electricity, which may disturb
the display. Keep the watch away from close contact
with objects such as TV screens, which emit strong
static electricity.
■ STATIC ELECTRICITY
■ LIQUID CRYSTAL PANEL
The normal life expectancy for a liquid crystal panel
is approximately 7 years. After that it may decrease
in contrast, becoming difficult to read. Please contact
your AUTHORIZED SEIKO DEALER or SERVICE
CENTER if you wish to have a new panel fitted
(guaranteed one year).
7 Years