User Guide

8
English
Press to show TIME/CALENDAR display.
A
Press to show TIME/CALENDAR SETTING display.
B
TIME/CALENDAR SETTING
• Regular alarm
time is displayed
only when it is
set.
A
B
C
D
● The time/calendar setting cannot be made for 10 minutes
after a dive.
* If the watch is left untouched in the TIME/CALENDAR SETTING
display, the display will automatically return to the TIME/
CALENDAR in 1 to 2 minutes.
Press to select the digits to be adjusted (flashing).
* With each press, the digits flash in the following order:
C
Seconds Minutes
Hour Year
➡
➡
➡
➡
➡
➡
➡
Date Month12-/24-hour indication
When all the segments of the display light up:
● If buttons C and D are pressed at the same time in the
TIME/CALENDAR SETTING display, all the segments of
the display will light up. This is not a malfunction. Press
button A, B, C or D to return to the TIME/CALENDAR
display, and set the time/calendar again.
Press to set the flashing digits.
* The digits move quickly by keeping the button pressed.
* When both the hour and minute digits are flashing, changeover
between 12- and 24-hour indications can be made.
* For the 12-hour indication, “AM” or “PM” is shown. There is
no mark for the 24-hour indication.
< Seconds setting >
When the seconds digits are flashing, press button D in
accordance with a time signal. The digits are reset to “00” and
start immediately.
* When the digits count any number from 30 to 59, one minute is
added and the seconds start immediately.
D
Press to return to TIME/CALENDAR display.
B
▼
Current
time
Regular
alarm
time
▼
▼
▼
▼
▼
▼
HOW TO USE TIME FUNCTIONS
■ TIME/CALENDAR FUNCTION