User`s manual

LP-1030-MF User's Manual for Multifunction Printer Operation

Before Use Copy Function

Submission

Function

Preset Functions Scan Function Troubleshooting

Chapter

- Originals with protruding parts such as an index or label

- Originals that are thin and soft

- Originals that are bound (such as books)

- Originals that are wet or sticky

- Originals with partial thickness dierences

- Originals stuck with adhesive tape or glue

- Originals with a thick plate attached to the end

- Originals with undried ink or correction uid

- Originals with rear carbon attached

- Originals other than paper (such as electronic substrates, glass products, or

metal products)



Using Carrier Sheets with Originals

Note



Be sure to use a carrier sheet to protect important or glossy originals.

* Without the carrier sheet, the original may be damaged by a jam or similar

problem.

The tracks from the advance roller may mark the original.

Use a carrier sheet for the following original types.

- Originals with 2 or more sheets axed or overlapped together

- Originals with folds

- Originals with wrinkles, rips, or other defects

- Originals with curls or waves

- Originals with tears, ssures, or holes

- Originals with a trace of paper clip

- Originals with staples

- Originals stuck with adhesive tape or glue

- Originals not straight on the front end

- Originals such as photographs that stick easily to glass

- Originals such as pencil drawings that may make the scanner glass or other

parts dirty

Also, to scan a non-standard size as a standard size, use a carrier sheet.