User Guide

8-2
z Set the paper straight into the paper insert position until 5 cm or more of the paper edge is
projected from the upper surface of the mechanism. (See Figure 8-2.) Close the platen after
making sure that the paper is set straight. (Close state)
Figure 8-2 Loading Paper (2)
z When the platen is closed, the gear A and the gear B come together (See Figure 8-3) and the
platen may stop. In this case, pull up the platen by the release lever, and then close the platen
again.
Figure 8-3 Loading Paper (3)
z When the paper slants after being inserted, either feed paper until it straightens out or reset
the paper.