User`s guide

Page 42
Note also that a small check-box named “Elink” appears at the bottom of the
screen. A check-mark in this box indicates that your Palm OS-based orga-
nizer is communicating with the SmartPad. The current condition of the
batteries in your SmartPad also appears on this line.
2. Tap to select the text of any existing To Do List item. If you want to create a
new To Do List item, tap the New button, and enter a name for the new item.
3. Create a new Ink Note for the To Do List item. To do this, use the SmartPad
pen, and begin writing on the paper pad of your SmartPad. Note that as soon
as you touch the Pen to the paper, the screen of your Palm OS-based orga-
nizer changes to record your Ink Note, as shown:
Tap Done when finished
The name for your new Ink Note appears at the top of the screen. The default
name is the date and time that you began the Ink Note. If you’re taking notes
in a hurry, you don’t have to worry about assigning a specific name; you can
easily review your notes based upon the entry in your To Do List.
As with the eMemo application, you can use the stylus, tap and drag to select
the name, and change the name to anything you want. If you want to change
this name, use the Graffiti writing area on your Palm OS-based organizer to
write a new name for the Ink Note.
Tip: The opposite end of the SmartPad pen contains a stylus tip that you can
use with your Palm OS-based organizer. You don’t have to switch between
the SmartPad pen and the Palm stylus to work with SmartPad!
4. Tap Done. You are returned to the list view of the eToDo screen. Note that
the Ink Note icon appears in the line with the record name. This shows that
there is an Ink Note associated with the To Do List item, as shown: