Specifications

22
English
NOTES ON USING THE WATCH
TIME/CALENDAR MODE
[TIME/CALENDAR SETTING]
● The calendar automatically adjusts for odd and even months including February of leap years from the
year 1998 up to the end of 2047.
● Once the year, month and date have been set, the day of the week is automatically set.
● The flashing digits except the seconds, the standard time/daylight saving time and the 12-/24-hour
indication move quickly if button C or E is kept pressed.
● Setting the seconds:
• With the second digits flashing, press button C or E in accordance with a time signal. The second
digits are reset to “00”.
• When the seconds read any number from “30” to “59” and button C or E is pressed, one minute
is added and the seconds are reset to “00”.
● If “GREENWICH” is selected for the city, the display to set daylight saving time will not be shown.
● By selecting “ON” for daylight saving time, “ ” mark appears, and one hour is advanced.
● If the watch is left untouched in the TIME/CALENDAR SETTING display with the digits flashing, it will
automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.
● When all the segments light up:
If buttons C and D are pressed at the same time in the TIME/CALENDAR
SETTING display, all the segments of the display will light up as shown
at right. This is not a malfunction.
Press any of the buttons to return to the TIME/CALENDAR mode and
then, set the time/calendar again.
[ADJUSTING THE CONTRAST ON THE DISPLAY]
● The contrast level has been initially set at “10” at the factory.
● When the contrast level is set to “0”, the digits on the display will not
be readable.