Specifications

24
English
memory recall function.
TIMER MODE
The timer counts down the set time repeatedly up to 10 times unless stopped.
[ADJUSTABLE TIMER SETTING]
The flashing digits move quickly if button C or E is kept pressed.
If the watch is left untouched in the ADJUSTABLE TIMER SETTING display with the digits flashing,
it will automatically return to the TIMER mode in 2 to 3 minutes.
WORLD TIME MODE
In the normal display, the daylight saving time (summer time) mark, country code, time and city mark
are shown. In the enlarged display, the daylight saving time mark is not displayed.
The time difference and use of daylight saving time may change in some areas or countries when they
are so decided by the countries concerned.
ILLUMINATING LIGHT (Electroluminescent panel)
The electroluminescent panel loses its luminance as the battery voltage decreases. Also, its
luminance level decreases gradually with use. After 120 hours of use, the level decreases by about
half.
When the illuminating light becomes dim, replace the battery with a new one. If the illuminating light
remains dim after the battery is replaced, have the electroluminescent panel replaced with a new one
by the retailer from whom the watch was purchased, or an AUTHORIZED SEIKO DEALER. It will be
replaced at cost.
While the illuminating light is used, the watch gives out a slight noise. However, this is not a
malfunction.
[TURNING ON/OFF OF THE BUTTON OPERATION CONFIRMATION LIGHT]
This function is deactivated automatically in 11 to 12 hours after it is activated.