Instruction manual

Instruction Manual Roundshot D3 - version 4.05 May 2013 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 121
6.3 Camera maintenance
The Roundshot D3 contains high-tech electronic components. Therefore it is
important to handle the camera with care, in particular:
Make sure that all brackets (for example: lens brackets) and releases (for example
optical bench release, rotation point release) are securely fastened, especially for
image taking
Do not use the camera in rain or snow without any special weatherproof case
Keep the camera in a cool and dry place for storage (ideally in the original case
supplied with the camera)
Do not expose the camera to excessive heat or cold for extended periods of time
Prevent exposure to dust, as an accumulation of dust particles on the digital sensor
may impair image quality
Make sure not to drop the equipment
When unplugging cables pull at the plug not at the cable
Very important:
Do not store the camera below -5° or above 40° C as the ultra-thin optical filters of
the camera may be damaged.
This means, for example, not to leave the equipment in the car when temperatures
are below 0° C or above 30° C as the temperature swings inside a car may be larger
than on the outside.
< 0° C
> 30° C