Instruction manual

Instruction Manual Roundshot D3 - version 4.05 – May 2013 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 38
3.2.3 Lens
Press the „Lens“ button in the „Parameter“ menu to activate the „Lens“ tab:
The lens tab contains the database of all lenses that can be used with the camera. It is
possible to add or remove a lens from the favourite lens list or edit properties. It is also
possible to create a new lens as described below:
The tab is divided into three sections:
Brand, Lens, Parameters
Brand: contains a list of all lens brands
stored in the data base
• New: click on “New” to create a new
brand
• Delete: click on “Delete” to delete
existing brands. Please note that factory
lens brands are not removable.
• Select: click on any brand to display all the
corresponding lenses in the next field
Lens: contains all lenses of the selected brand
• Click on “New” to create a new lens
• Click on “Delete” to delete existing lenses.
Please note that factory lenses are not removable.
• Favourite: activate or deactivate the checkbox on the left side of any lens to add or
remove the lens from the favourite lens list
• Select: click on any lens to display all its attributes in the next field (name, focal
length...). The attributes of factory calibrated lenses cannot be edited.
Parameters: contains all the selected lens attributes (name, focal length...). It is
possible to edit these attributes. Please refer to next page for detailed explanation of
every attribute.