Instruction manual

Instruction Manual Roundshot D3 - version 4.05 – May 2013 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 80
4.10 … create turntable scans (continued)
The turntable hardware set-up is slightly different from using a regular Roundshot D3.
the motor is attached on one side of the bench and the camera body on the other.
Connect the power cable from the power socket on the digital back to the socket for
external power cable on the static part of the motor as shown below. This way the
cable will not be twisted when scanning the objects.
Connect the ethernet cable from the ethernet socket on the digital back directly to
the corresponding socket on the computer. No ethernet connection to the motor is
necessary.
Switch on the camera from the motor part as usual, and establish a connection with the
computer.
4.10.1 Hardware set-up
Power cable
connection