Instruction Guide

7. CHRONOGRAPH
CHRONOGRAPH FUNCTION:
MEASURING TIME WITH THE CHRONOGRAPH:
CHRONOGRAPH ZERO RESET:
In the event that the chronograph hands do not return to
zero (0), when reset - take the following steps.
This chronograph is able to measure and display time
in 1/1 second units up to a maximum of 60 minutes.
Start and stop the chronograph by pressing ‘PB1’.
Pressing ‘PB2’ resets the chronograph and all hands
return to their (0) zero positions.
Pull button out to position ‘C’.
Press ‘PB1’ to set the chronograph seconds hand to
the (0) zero position.
*The chronograph hands can be advanced rapidly by
continuously pressing ‘PB1’.
Once the hands have been set to (0) zero, reset the
time and return the button to position ‘A’.