Operating instructions

3. Custom setting function

To match your camera, you can set the setting value

and display value to full, 1/2 or 1/3 stop.

1) To enter custom setting mode, hold down the

Mode button e and turn ON the power

button q.

2) Once custom setting mode is entered, the

‘CS’ for custom setting will be displayed in

the ISO display area, and the setting number

will be displayed in the aperture value display

area.

3) The setting number will change every time

the Mode button e is pressed.

4) After completing the custom setting, turn OFF the power button to close the

custom setting mode. The power will be automatically turned OFF with this

operation.

NOTE: ● The 1/10 stop measurement value displayed when 1 stop is set

will not be displayed when 1/2 stop or 1/3 stop is set.

● When using EV mode the 1/10 stop measurement value will be

displayed whatever the stop is set.

POWER

1 stop 1/2 stop 1/3 stop

(1/10 stop display)

6. Advanced Functions

Setting number