Operating instructions

Light-receiving Method

4.1 Incident light metering

Hold L-308BII close to the subject, point the lumisphere towards the camera, and measure the

incident light intensity, (Fig. 8)

;Q,,

////

Fig

Caution: Do not fit the Lumidisc next to the Lumisphere when you take incident light

metering. Otherwise, the Lumidisc will affect the exposure in proper reading.

4.2 Reflected light metering

You can meter the reflected light of the object by pointing the L-308Bll’s lens at the object from the

camera’s position. (Fig. 9).

Fig. 9

Caution:

If you measure from the camera position, the entire object is measured in average.

If you want to measure only a part of the object, do it at as close a position as

possible to the part measured. Take care so that the part measured may not be

shadowed by the meter, etc.