Operation Manual

Preparing to operate
Battery
Use a 1.5V silver oxide battery (G13 AS designation).
First, use a coin to remove the battery compartment cap
(14) by rotating it to the left.
Now load the silver
oxide battery with
the (+) side face
up. Remove the
battery if you do
not intend to use
the unit for a long
period of time.
Battery check
The exposure meter needle will not point to the
correct value if the voltage of the battery falls below
the rating, and so it is a good idea to check the
voltage before use. Depress the battery check button
(1 5) and if the battery check mark (2) is
not indicated by the
needle (41, replace
the battery with a
new one. De not
depress the switch
button (5) when
checking the battery.