Operation Manual

11
4
Basic Operation
Hold ISO button and press MODE button to return to the previous Measuring
mode.
Ambient light refers to continuous light like natural light (sunlight), tungsten
lamps or fluorescent lamps.
Flash light is a brief, intense burst of light made by electronic flash units or
flash bulbs.
•
•
•
7. Setting ISO sensitivity
Hold down the ISO button and press
either the UP button or DOWN
button to select ISO sensitivity being
used.
You can also change the
ISO sensitivity after taking
measurements. The new value is
automatically displayed.
Setting value will change consecutively if the UP button or DOWN button is
depressed for one second or longer.
•
1)
2)
ISO
UP button
DOWN button
ISO button