Operation Manual

5
Measurement
1. HD_CINE Mode
Use this mode to obtain exposure settings when using DSLR and digital video cameras
that record images using frame rate and shutter speed settings. When measurements
are taken, the meter will indicate the aperture value required for proper exposure.
This mode also enables taking Simplified Illuminance readings (Selectable in Custom
setting). Refer to the custom setting to select the HD_CINE mode (See page 26).
1-1. Taking measurements in Shutter
Speed Priority mode
Press MODE button to select the
Shutter Speed Priority mode.
Hold ISO button and press UP or DOWN
button to select the ISO sensitivity (See
page 11)
Press the UP or DOWN button to set the
desired shutter speed.
If necessary, set the frame rate in Frame
Rate Setting mode (Default setting is
24fps. See page 13).
Press the Measuring button to take a
measurement. Measurements will be
taken continuously and displayed as
aperture values as long as the button
is pressed. Releasing the Measuring
button will hold and display the last
measurement value.
Use Custom Setting to display shutter speed values in full, 1/2 or 1/3 step
increment (See page 26).
Shutter speeds can be set from 1/8 to 1/8000 sec. A special grouping of
commonly used Cine Shutter speeds will appear above 1/8000 second (1/24,
1/25, 1/30, 1/48, 1/50, 1/60, 1/96, 1/100, 1/120 sec.).
Frame rate sets the lower limit to shutter speed. (i.e. If 30 f/s is set, shutter
speeds are settable from 1/30 sec.)
•
•
•
1)
2)
3)
4)
5)
12
M
O
D
E
MODE button
UP button
DOWN button
ISO button
1/10 step measurement
value (f stop)
Set shutter speed
Measurement
value (f stop)