Operation Manual

14
5
Measurement
2. CINE Mode
Use this mode to obtain exposure settings when using film or digital motion-picture
cameras that record images using frame rate and shutter angle settings. When
measurements are taken, the meter will indicate the aperture value required for proper
exposure. This mode also enables taking Simplified Illuminance readings (Selectable in
Custom setting). Refer to the custom setting to select CINE mode (See page 26).
2-1. Taking measurements in Frame
Rate Priority mode
Press MODE button to select Frame
rate priority mode.
Hold ISO button and press UP or DOWN
button to select the ISO sensitivity (See
page 11)
Press UP or DOWN button to set the
desired frame rate.
If necessary, set shutter angle in Shutter
Angle Setting mode (default setting is
180 degrees. See page 15).
Press the MEASURING button to take
a measurement. Measurements will be
taken continuously and displayed as
aperture values as long as the button
is pressed. Releasing the MEASURING
button will hold and display the last
measurement value.
Available frame rates include 8, 12, 16, 18, 24, 25, 30, 32, 48, 50, 60, 64, 96,
100, 120 and 128 f/s.
After the measurement, the aperture value will be automatically adjusted to
maintain proper exposure when changes in shutter speed and/or ISO are made.
If “E.o”(over) or “E.u” (under) appears and blinks, the measurement cannot
be made at the selected settings (See page 23).
•
•
•
1)
2)
3)
4)
5)
M
O
D
E
MODE button
ISO button
UP button
DOWN button
1/10 step measurement
value (f stop)
Set frame rate
Measurement
value (f stop)