Operation Manual

5
Measurement
2-2. Setting Shutter Angles
Press MODE button to select the
Shutter Angle Setting mode.
Press UP or DOWN button to set the
desired shutter angle.
Press MEASURING button to return to
Frame rate priority mode, and make a
light measurement simultaneously.
Available Shutter angles include 45, 90, 180, 270 and 360 degrees.•
2-3. Taking measurements in Simplified illuminance mode
Illuminance mode can be selected in Custom
setting (See page 26).
Slide the Lumisphere all the way to the right
and attach the accessory Lumidisc (See page
7).
Press MODE button to select the simplified
illuminance mode.
Position the Lumidisc in front of and parallel
to the area to be measured and press
MEASURING button. Measurements will
be taken continuously and displayed as
illuminance values as long as the button is
pressed. Releasing the MEASURING button
will hold and display the last measurement
value.
1)
2)
3)
1)
2)
3)
15
M
O
D
E
MODE button
UP button
DOWN button
Lumidisc
Lumisphere
Measurement value (Lux)
Measurement value (Foot-Candle)